Drop C# tuner

Tune your guitar to drop C# (C# G# C# F# A# D#) with your phone or computer microphone. Press start, play a string and follow the needle.

Quick answer

Drop C#, low to high: C# G# C# F# A# D#. From standard tuning: every string down a half step (-1) except the 6th, E to C# (-3).

Mic off
C#2
Tap start, then play any string

Too low (flat)? Tighten the peg. Too high (sharp)? Loosen it.

  1. Click Start tuner and choose Allow when the browser asks for the microphone.
  2. Hold the guitar close to your laptop. The mic is usually next to the camera above the screen.
  3. Play one string and let it ring. Follow the needle to the middle.

Allow the microphone, then play one string close to your phone.

Sound stays on your device. Nothing is recorded or uploaded.

Instrument

Drop D a half step lower; heavy rock

Strings, low to high

Tap a string to hear its note. While the tuner listens, tap one to lock onto it.

Reference pitch A4 = 440 Hz

Leave this at 440 unless you are matching a piano or a record that is off standard pitch.

For screen readers: announces the note and which way to turn the peg about every 1.5 seconds while a string rings. Press R for a reading any time.

Each string and its pitch. Tap to hear it.

Now play something in drop C#

Lay one finger flat across the lowest three strings. Open, that's a C#5 power chord; at the 3rd fret it's E5, at the 5th fret it's F#5, at the 7th fret it's G#5. Slide it around and you have most of a heavy riff.

Drop C# notes and frequencies

Drop C#: notes and frequencies with A4 = 440 Hz
StringNoteFrequency
6C#269.30 Hz
5G#2103.83 Hz
4C#3138.59 Hz
3F#3185.00 Hz
2A#3233.08 Hz
1D#4311.13 Hz

Drop C# is C# G# C# F# A# D#, from the lowest string to the highest. Drop C# is half step down tuning with the low string dropped one more whole step. Put another way, it is drop D moved down a half step: the same one-finger power chords on the bottom three strings, only lower. It shows up a lot in heavy rock and metal.

The lowest note is C#2 at 69.30 Hz.

Change from standard tuning

Drop C# compared with standard tuning, string by string
StringStandardDrop C#Change in semitonesNew frequency
6E2C#2-3 (down a step and a half)69.30 Hz
5A2G#2-1 (down a half step)103.83 Hz
4D3C#3-1 (down a half step)138.59 Hz
3G3F#3-1 (down a half step)185.00 Hz
2B3A#3-1 (down a half step)233.08 Hz
1E4D#4-1 (down a half step)311.13 Hz

All 6 strings change.

How to get from standard tuning to drop C#

  1. Lower the 6th string a step and a half from E to C#, using the tuner above to land on C#2 (69.30 Hz).
  2. Lower the 4th string a half step from D to C# until it sounds one octave above the open 6th string (C#).
  3. Lower the 5th string a half step from A to G# until its 5th fret matches the open 4th string (C#).
  4. Lower the 3rd string a half step from G to F# until it matches the 4th string at the 5th fret (F#).
  5. Lower the 2nd string a half step from B to A# until it matches the 3rd string at the 4th fret (A#).
  6. Lower the 1st string a half step from E to D# until it matches the 2nd string at the 5th fret (D#).

Or skip the ear work: pick Drop C# in the tuner above and follow the needle on each string.

Using the guitar tuner

  1. Press Start tuner and allow the microphone.
  2. Play one string of your guitar at a time and let it ring.
  3. Tune up if the needle sits left of center and down if it sits right. The note turns green within 3 cents.

Related tuners

Tuners for every setup

A clip-on works anywhere. A pedal tuner mutes your signal on stage.

  • Our pickTC Electronic PolyTune Clip

    Tunes all six strings at once. Fast and accurate.

    View on Amazon
  • Boss TU-3

    The stage-standard pedal tuner, and it can power other pedals too.

    View on Amazon
  • Snark ST-8

    Cheap, bright and good enough for practice.

    View on Amazon

See all capos, tuners and toolsGear for you

As an Amazon Associate GuitarMath earns from qualifying purchases. How we choose gear.

Common questions

What notes are in drop C# tuning?
C#2 (69.30 Hz), G#2 (103.83 Hz), C#3 (138.59 Hz), F#3 (185.00 Hz), A#3 (233.08 Hz), D#4 (311.13 Hz), from the lowest string to the highest.
How do I tune to drop C# from standard tuning?
Lower the 6th string a step and a half from E to C#, using the tuner above to land on C#2 (69.30 Hz). Lower the 4th string a half step from D to C# until it sounds one octave above the open 6th string (C#). Lower the 5th string a half step from A to G# until its 5th fret matches the open 4th string (C#). Lower the 3rd string a half step from G to F# until it matches the 4th string at the 5th fret (F#). Lower the 2nd string a half step from B to A# until it matches the 3rd string at the 4th fret (A#). Lower the 1st string a half step from E to D# until it matches the 2nd string at the 5th fret (D#).

Last updated November 15, 2026.