B standard tuner

Tune your guitar to B standard (B E A D F# B) with your phone or computer microphone. Press start, play a string and follow the needle.

Quick answer

B standard, low to high: B E A D F# B. From standard tuning: every string down two and a half steps (-5).

Mic off
B1
Tap start, then play any string

Too low (flat)? Tighten the peg. Too high (sharp)? Loosen it.

  1. Click Start tuner and choose Allow when the browser asks for the microphone.
  2. Hold the guitar close to your laptop. The mic is usually next to the camera above the screen.
  3. Play one string and let it ring. Follow the needle to the middle.

Allow the microphone, then play one string close to your phone.

Sound stays on your device. Nothing is recorded or uploaded.

Instrument

Baritone guitars and modern metal

Strings, low to high

Tap a string to hear its note. While the tuner listens, tap one to lock onto it.

Reference pitch A4 = 440 Hz

Leave this at 440 unless you are matching a piano or a record that is off standard pitch.

For screen readers: announces the note and which way to turn the peg about every 1.5 seconds while a string rings. Press R for a reading any time.

Each string and its pitch. Tap to hear it.

B standard notes and frequencies

B standard: notes and frequencies with A4 = 440 Hz
StringNoteFrequency
6B161.74 Hz
5E282.41 Hz
4A2110.00 Hz
3D3146.83 Hz
2F#3185.00 Hz
1B3246.94 Hz

B standard is B E A D F# B, from the lowest string to the highest. Every string drops five semitones (two and a half steps) from standard, which is standard tuning moved down a perfect fourth. Baritone guitars are often tuned this way. On a regular six-string you need much heavier strings to keep the tension up.

The lowest note is B1 at 61.74 Hz.

Change from standard tuning

B standard compared with standard tuning, string by string
StringStandardB standardChange in semitonesNew frequency
6E2B1-5 (down two and a half steps)61.74 Hz
5A2E2-5 (down two and a half steps)82.41 Hz
4D3A2-5 (down two and a half steps)110.00 Hz
3G3D3-5 (down two and a half steps)146.83 Hz
2B3F#3-5 (down two and a half steps)185.00 Hz
1E4B3-5 (down two and a half steps)246.94 Hz

Every string goes down two and a half steps (5 semitones), so the chord and scale shapes you already know stay the same and simply sound lower.

How to get from standard tuning to B standard

  1. Lower the 6th string two and a half steps from E to B, using the tuner above to land on B1 (61.74 Hz).
  2. Lower the 5th string two and a half steps from A to E until it matches the 6th string at the 5th fret (E).
  3. Lower the 4th string two and a half steps from D to A until it matches the 5th string at the 5th fret (A).
  4. Lower the 3rd string two and a half steps from G to D until it matches the 4th string at the 5th fret (D).
  5. Lower the 2nd string two and a half steps from B to F# until it matches the 3rd string at the 4th fret (F#).
  6. Lower the 1st string two and a half steps from E to B until it matches the 2nd string at the 5th fret (B).

Or skip the ear work: pick B standard in the tuner above and follow the needle on each string.

Using the guitar tuner

  1. Press Start tuner and allow the microphone.
  2. Play one string of your guitar at a time and let it ring.
  3. Tune up if the needle sits left of center and down if it sits right. The note turns green within 3 cents.

Related tuners

Strings people actually use

Light gauges bend easier. Heavier gauges hold tuning and sound fuller, especially in lower tunings.

  • Our pickD'Addario EXL110 (10-46)

    The most common electric set there is. A safe default for standard tuning.

    View on Amazon
  • Ernie Ball Regular Slinky (10-46)

    Same gauges, a slightly brighter feel. A favorite for rock players.

    View on Amazon
  • D'Addario EXL140 (10-52)

    Light top, heavy bottom. Great for drop tunings without floppy low strings.

    View on Amazon
  • D'Addario EJ16 (12-53)

    The classic acoustic set in phosphor bronze.

    View on Amazon

See all guitar stringsGear for you

As an Amazon Associate GuitarMath earns from qualifying purchases. How we choose gear.

Common questions

What notes are in B standard tuning?
B1 (61.74 Hz), E2 (82.41 Hz), A2 (110.00 Hz), D3 (146.83 Hz), F#3 (185.00 Hz), B3 (246.94 Hz), from the lowest string to the highest.
How do I tune to B standard from standard tuning?
Lower the 6th string two and a half steps from E to B, using the tuner above to land on B1 (61.74 Hz). Lower the 5th string two and a half steps from A to E until it matches the 6th string at the 5th fret (E). Lower the 4th string two and a half steps from D to A until it matches the 5th string at the 5th fret (A). Lower the 3rd string two and a half steps from G to D until it matches the 4th string at the 5th fret (D). Lower the 2nd string two and a half steps from B to F# until it matches the 3rd string at the 4th fret (F#). Lower the 1st string two and a half steps from E to B until it matches the 2nd string at the 5th fret (B).

Last updated November 15, 2026.