Amp heads, cabinets and half stacks

Quick answer

A half stack is an amp head sitting on one 4x12 speaker cabinet. Pick a head for the tone, a cab for the sound and size, then match impedance: set a tube head's output to the cab's ohm rating, and never run a tube head without a speaker connected.

Heads and cabs split the amplifier from the speakers, so you can mix and match, upgrade one part at a time, and go from a lunchbox head on a 1x12 at home to a full half stack on stage. Here are proven heads, cabs and sets from Marshall, Orange, Peavey, EVH and Boss.

Tier

19 of 19 picks

Tube and hybrid amp heads 7

Full-size tube heads plus small lunchbox heads.

  • Our pickPremium

    Marshall

    Marshall DSL100HR

    Tube head

    Best for Rock players building a classic Marshall half stack

    A 100 W EL34 head with clean, crunch and two high-gain modes, plus a 50 W setting. The classic choice for a Marshall stack.

    Power
    100 W (50 W switchable)
    Power tubes
    4 x EL34
    Speaker outputs
    16, 8 or 4 ohms
    View on Amazon
  • Mid-range

    Marshall

    Marshall DSL20HR

    Tube head

    Best for Home and small-gig players who want a Marshall head

    The same two-channel DSL voice in a 20 W head that switches to 10 W. Great on a 1x12 or 2x12.

    Power
    20 W (10 W switchable)
    Power tubes
    2 x EL34
    Speaker outputs
    16 or 8 ohms
    View on Amazon
  • Premium

    Orange

    Orange Rockerverb 50 MKIII

    Tube head

    Best for Players who want big Orange gain and great cleans

    A two-channel all-tube head with reverb and a footswitchable attenuator. Thick, saturated drive with a clean channel that takes pedals well.

    Power
    50 W
    Channels
    2 (clean and dirty)
    Reverb
    Built in
    View on Amazon
  • Premium

    Peavey

    Peavey 6505 II

    Tube head

    Best for Metal players

    Peavey's high-gain flagship lineage, dating back to 1992. Tight, aggressive and loud, with an impedance selector for easy cab matching.

    Power
    120 W
    Speaker outputs
    16, 8 or 4 ohms
    View on Amazon
  • Mid-range

    EVH

    EVH 5150III 15W LBX-S

    Tube lunchbox head

    Best for High-gain players who want a small tube head

    A 15 W lunchbox head with EVH's green and red channels in one box. Real tube high gain at manageable volume.

    Power
    15 W
    Speaker outputs
    4, 8 or 16 ohms (2 parallel jacks)
    View on Amazon
  • Mid-range

    Peavey

    Peavey 6505 MH

    Tube lunchbox head

    Best for Metal players at home

    A 20 W all-tube mini head that mirrors the full 6505's gain structure. A speaker-defeat feature lets you use it silently for recording.

    Power
    20 W
    Type
    All-tube mini head
    View on Amazon
  • Budget

    Orange

    Orange Micro Terror

    Hybrid lunchbox head

    Best for Trying a head-and-cab rig for very little money

    A tiny hybrid head with a 12AX7 (ECC83) tube preamp and a solid-state power amp. Surprisingly loud through a good cab.

    Power
    20 W
    Preamp
    1 x ECC83 tube
    Power amp
    Solid state
    View on Amazon
Compare tube and hybrid amp heads
NameTypeTierBest forKey specs
Marshall DSL100HR Our pickTube headPremiumRock players building a classic Marshall half stackPower: 100 W (50 W switchable); Power tubes: 4 x EL34; Speaker outputs: 16, 8 or 4 ohms
Marshall DSL20HRTube headMid-rangeHome and small-gig players who want a Marshall headPower: 20 W (10 W switchable); Power tubes: 2 x EL34; Speaker outputs: 16 or 8 ohms
Orange Rockerverb 50 MKIIITube headPremiumPlayers who want big Orange gain and great cleansPower: 50 W; Channels: 2 (clean and dirty); Reverb: Built in
Peavey 6505 IITube headPremiumMetal playersPower: 120 W; Speaker outputs: 16, 8 or 4 ohms
EVH 5150III 15W LBX-STube lunchbox headMid-rangeHigh-gain players who want a small tube headPower: 15 W; Speaker outputs: 4, 8 or 16 ohms (2 parallel jacks)
Peavey 6505 MHTube lunchbox headMid-rangeMetal players at homePower: 20 W; Type: All-tube mini head
Orange Micro TerrorHybrid lunchbox headBudgetTrying a head-and-cab rig for very little moneyPower: 20 W; Preamp: 1 x ECC83 tube; Power amp: Solid state

Solid-state and modeling heads 1

Light, reliable heads with many sounds built in.

  • Our pickMid-range

    Boss

    Boss Katana Head Gen 3

    Modeling head

    Best for Players who want one light head for practice and gigs

    A 100 W modeling head with a small built-in speaker for practice. Plug into a cab for full power.

    Power
    100 W into external cab, 30 W built-in
    Built-in speaker
    5 in
    Minimum cab impedance
    8 ohms
    View on Amazon
Compare solid-state and modeling heads
NameTypeTierBest forKey specs
Boss Katana Head Gen 3 Our pickModeling headMid-rangePlayers who want one light head for practice and gigsPower: 100 W into external cab, 30 W built-in; Built-in speaker: 5 in; Minimum cab impedance: 8 ohms

1x12 cabinets 2

Compact cabs for home, studio and small gigs.

  • Orange PPC112Our pickMid-range

    Photo: wetwebwork, CC BY-SA 2.0

    Orange

    Orange PPC112

    1x12 cabinet

    Best for Pairing with a lunchbox head

    A sturdy closed-back 1x12 with a Celestion Vintage 30. Punchy and focused, an easy match for small heads.

    Speaker
    1 x 12 in Celestion Vintage 30
    Power handling
    60 W
    Impedance
    16 ohms
    View on Amazon
  • Budget

    Marshall

    Marshall MX112

    1x12 cabinet

    Best for A DSL20 head or any lunchbox head

    Marshall's compact 1x12, built as a partner for the DSL20 head. A Celestion Seventy 80 speaker handles plenty of power.

    Speaker
    1 x 12 in Celestion Seventy 80
    Power handling
    80 W
    Impedance
    16 ohms
    View on Amazon
Compare 1x12 cabinets
NameTypeTierBest forKey specs
Orange PPC112 Our pick1x12 cabinetMid-rangePairing with a lunchbox headSpeaker: 1 x 12 in Celestion Vintage 30; Power handling: 60 W; Impedance: 16 ohms
Marshall MX1121x12 cabinetBudgetA DSL20 head or any lunchbox headSpeaker: 1 x 12 in Celestion Seventy 80; Power handling: 80 W; Impedance: 16 ohms

2x12 cabinets 2

More volume and low end, still car-friendly.

  • Our pickMid-range

    Orange

    Orange PPC212

    2x12 cabinet

    Best for Orange heads and gigging players

    A closed-back 2x12 with two Vintage 30s. Orange recommends it for the Rockerverb 50 and Dual Terror.

    Speakers
    2 x 12 in Celestion Vintage 30
    Power handling
    120 W
    Impedance
    16 ohms
    View on Amazon
  • Mid-range

    Marshall

    Marshall MX212

    2x12 cabinet

    Best for Marshall heads in smaller rooms

    A 2x12 that pairs with almost any Marshall head. Two Celestion Seventy 80 speakers give a full, classic rock sound.

    Speakers
    2 x 12 in Celestion Seventy 80
    Power handling
    150 W
    View on Amazon
Compare 2x12 cabinets
NameTypeTierBest forKey specs
Orange PPC212 Our pick2x12 cabinetMid-rangeOrange heads and gigging playersSpeakers: 2 x 12 in Celestion Vintage 30; Power handling: 120 W; Impedance: 16 ohms
Marshall MX2122x12 cabinetMid-rangeMarshall heads in smaller roomsSpeakers: 2 x 12 in Celestion Seventy 80; Power handling: 150 W

4x12 cabinets 3

The classic stage cab and the bottom half of a half stack.

  • Our pickMid-range

    Marshall

    Marshall MX412AR

    4x12 cabinet

    Best for Building a Marshall half stack

    An angled 4x12 with four Celestion G12E-60 speakers that works with most Marshall heads. Set your head to 16 ohms.

    Speakers
    4 x 12 in Celestion G12E-60
    Power handling
    240 W
    Impedance
    16 ohms
    View on Amazon
  • Premium

    Orange

    Orange PPC412

    4x12 cabinet

    Best for Orange half stacks and heavy music

    Orange's flagship straight-front 4x12 with four Vintage 30s in birch ply. Tight lows, big mids and real stage presence.

    Speakers
    4 x 12 in Celestion Vintage 30
    Power handling
    240 W
    Impedance
    16 ohms
    View on Amazon
  • Premium

    Peavey

    Peavey 6505 Reissue 412 Straight

    4x12 cabinet

    Best for 6505 heads and high-gain metal

    Designed to the specs of Peavey's original 1992 cab, with a stereo/mono switch. The natural partner for a 6505 head.

    Speakers
    4 x 12 in Sheffield 1230+
    Power handling
    300 W
    Wiring
    Stereo/mono switch
    View on Amazon
Compare 4x12 cabinets
NameTypeTierBest forKey specs
Marshall MX412AR Our pick4x12 cabinetMid-rangeBuilding a Marshall half stackSpeakers: 4 x 12 in Celestion G12E-60; Power handling: 240 W; Impedance: 16 ohms
Orange PPC4124x12 cabinetPremiumOrange half stacks and heavy musicSpeakers: 4 x 12 in Celestion Vintage 30; Power handling: 240 W; Impedance: 16 ohms
Peavey 6505 Reissue 412 Straight4x12 cabinetPremium6505 heads and high-gain metalSpeakers: 4 x 12 in Sheffield 1230+; Power handling: 300 W; Wiring: Stereo/mono switch

Half stacks and matched sets 4

A head and cab sold together, so the match is already done.

  • Our pickPremium

    Marshall

    Marshall DSL100HR + MX412AR Half Stack

    Half stack (head + 4x12)

    Best for Anyone who wants the classic rock half stack in one purchase

    The 100 W DSL head on an angled 240 W, 16 ohm 4x12. Plug the cab into the head's 16 ohm output and you're done.

    Head
    DSL100HR, 100 W
    Cab
    MX412AR, 4 x 12 in, 240 W, 16 ohms
    View on Amazon
  • Premium

    Peavey

    Peavey 6505 II Half Stack

    Half stack (head + 4x12)

    Best for Metal players who want a matched high-gain stack

    Peavey sells the 6505 II head with a 6505 Reissue 4x12 as a half stack bundle, in straight or slant versions.

    Head
    6505 II, 120 W
    Cab
    6505 Reissue 412, 300 W
    View on Amazon
  • Mid-range

    Marshall

    Marshall DSL20HR + MX212AR Mini Stack

    Mini stack (head + 2x12)

    Best for Players who want the stack look at home volume

    Not a full half stack, but the same idea at a friendlier size: the 20 W DSL head on an angled 2x12.

    Head
    DSL20HR, 20 W
    Cab
    MX212AR, 2 x 12 in
    View on Amazon
  • Budget

    Orange

    Orange Micro Terror + PPC108 Micro Stack

    Micro stack (head + 1x8)

    Best for A desk-sized stack for practice

    The Micro Terror head on the PPC108, a 20 W, 8 ohm 1x8 cab Orange designed for it. A fun, tiny first stack.

    Head
    Micro Terror, 20 W
    Cab
    PPC108, 1 x 8 in, 20 W, 8 ohms
    View on Amazon
Compare half stacks and matched sets
NameTypeTierBest forKey specs
Marshall DSL100HR + MX412AR Half Stack Our pickHalf stack (head + 4x12)PremiumAnyone who wants the classic rock half stack in one purchaseHead: DSL100HR, 100 W; Cab: MX412AR, 4 x 12 in, 240 W, 16 ohms
Peavey 6505 II Half StackHalf stack (head + 4x12)PremiumMetal players who want a matched high-gain stackHead: 6505 II, 120 W; Cab: 6505 Reissue 412, 300 W
Marshall DSL20HR + MX212AR Mini StackMini stack (head + 2x12)Mid-rangePlayers who want the stack look at home volumeHead: DSL20HR, 20 W; Cab: MX212AR, 2 x 12 in
Orange Micro Terror + PPC108 Micro StackMicro stack (head + 1x8)BudgetA desk-sized stack for practiceHead: Micro Terror, 20 W; Cab: PPC108, 1 x 8 in, 20 W, 8 ohms

New amp? Crank it on these

Buying guide

What is a half stack (and a full stack)

A head is the amplifier on its own, with no speaker. A cabinet (cab) is a box of speakers with no amplifier. Put a head on top of one 4x12 cabinet and you have a half stack. Add a second 4x12 underneath and it's a full stack.

Smaller setups follow the same idea: a head on a 2x12 or 1x12 is often called a mini stack. Many players find a 2x12 is plenty loud and much easier to carry than a 4x12.

Impedance (ohms) matching rules

Every cab has an impedance rating, usually 4, 8 or 16 ohms, printed on the back. With a tube head, set the output selector (or use the jack) that matches the cab's rating. A small mismatch for a short time is usually survivable, but matching is the safe habit.

Never switch on a tube head with no speaker plugged in. With no load, the output transformer can be damaged. Solid-state heads are the opposite: they list a minimum impedance. A cab at or above that number is fine, and going higher just gives a bit less power. Going below the minimum can overheat the amp.

Two identical cabs on a head's parallel outputs halve the load: two 16 ohm cabs make 8 ohms, two 8 ohm cabs make 4 ohms. Most heads with two speaker jacks wire them in parallel, so set the selector to the combined value.

Power handling

Make sure the cab's power rating is at least the head's output wattage, ideally with room to spare. A 100 W head belongs on a 4x12 rated well above 100 W, not a 20 W practice cab.

Lunchbox heads (about 15 to 20 W) are a great match for a 1x12 or 2x12 at home and still loud enough for small gigs.

Matching head and cab pairs

Marshall DSL100HR on a Marshall MX412AR (240 W, 16 ohms): use the head's 16 ohm output. Orange Rockerverb 50 MKIII on an Orange PPC412 (240 W, 16 ohms) or PPC212 (120 W, 16 ohms). Peavey 6505 II on a 6505 Reissue 412 cab. EVH 5150III LBX-S on a Marshall MX112 or Orange PPC112 for a compact rig. Orange Micro Terror on an Orange PPC108 (20 W, 8 ohms).

Always double-check the ohm rating on your cab's back panel before you plug in, since some cabs have mono and stereo modes with different ratings.

Complete your rig

0 of 6 ticked. Tick what you already own.

  1. Guitar
  2. Amp
  3. Tuner
  4. Picks
  5. Strap
  6. Cable

As an Amazon Associate GuitarMath earns from qualifying purchases. How we choose gear.

Common questions

What is the difference between a half stack and a combo?
A combo has the amp and speaker in one box. A half stack separates them: a head on top of a 4x12 cabinet. Half stacks move more air and let you swap heads or cabs, but they're bigger and heavier.
Can I use a 16 ohm cab with an 8 ohm output?
On a tube head it's best to match exactly, so use the 16 ohm output if the head has one. On a solid-state head, a 16 ohm cab on an amp rated for a minimum of 8 ohms is safe and just gives somewhat less power.
Can I run a tube amp head without a cabinet?
No. A tube head needs a speaker load whenever it's on and not in standby. Running it with no load can destroy the output transformer. Use a cab or a proper load box.
Is a 4x12 too loud for home?
Usually, yes. A 4x12 is built for stage volume. At home, a 1x12 or 2x12 with a lunchbox head or a head with power reduction is far more practical.
Do I need a 4x12 or will a 2x12 do?
A 2x12 is loud enough for most clubs and much easier to move. A 4x12 adds low-end thump and stage presence, especially for high-gain rock and metal.

Last updated November 15, 2026.