Baritone ukulele tuner

Tune your baritone ukulele to standard tuning (D G B E) with your phone or computer microphone. Press start, play a string and follow the needle.

Quick answer

Baritone ukulele, low to high: D G B E.

Mic off
D3
Tap start, then play any string

Too low (flat)? Tighten the peg. Too high (sharp)? Loosen it.

  1. Click Start tuner and choose Allow when the browser asks for the microphone.
  2. Hold the ukulele close to your laptop. The mic is usually next to the camera above the screen.
  3. Play one string and let it ring. Follow the needle to the middle.

Allow the microphone, then play one string close to your phone.

Sound stays on your device. Nothing is recorded or uploaded.

Instrument

Same as the top four guitar strings

Strings, low to high

Tap a string to hear its note. While the tuner listens, tap one to lock onto it.

Reference pitch A4 = 440 Hz

Leave this at 440 unless you are matching a piano or a record that is off standard pitch.

For screen readers: announces the note and which way to turn the peg about every 1.5 seconds while a string rings. Press R for a reading any time.

Each string and its pitch. Tap to hear it.

Baritone ukulele notes and frequencies

Baritone ukulele: notes and frequencies with A4 = 440 Hz
StringNoteFrequency
4D3146.83 Hz
3G3196.00 Hz
2B3246.94 Hz
1E4329.63 Hz

Baritone ukulele is D G B E, from the lowest string to the highest. The baritone is the largest of the four common ukulele sizes (soprano, concert, tenor and baritone). It is tuned D G B E, the same notes as the top four strings of a guitar, so guitar chord shapes work on it. Unlike a standard ukulele it is not re-entrant: the strings run from low to high.

The lowest note is D3 at 146.83 Hz.

Tuning by ear

Tune one string with the tuner, then match the rest to it:

  1. Tune the 4th string to D, using the tuner above to land on D3 (146.83 Hz).
  2. Tune the 3rd string to G until it matches the 4th string at the 5th fret (G).
  3. Tune the 2nd string to B until it matches the 3rd string at the 4th fret (B).
  4. Tune the 1st string to E until it matches the 2nd string at the 5th fret (E).

Using the ukulele tuner

  1. Press Start tuner and allow the microphone.
  2. Play one string of your baritone ukulele at a time and let it ring.
  3. Tune up if the needle sits left of center and down if it sits right. The note turns green within 3 cents.

Related tuners

Ukulele strings and gear

New strings are the cheapest way to make a ukulele sound better. A clip-on tuner keeps it there.

  • Our pickAquila Nylgut ukulele strings

    The warm, classic uke sound. Many ukuleles ship with them.

    View on Amazon
  • Martin M600 fluorocarbon

    Brighter and clearer than nylon, a popular upgrade.

    View on Amazon
  • Snark SN6X ukulele tuner

    A clip-on tuner made for ukulele.

    View on Amazon
  • Kyser Quick-Change ukulele capo

    A small capo sized for a ukulele neck.

    View on Amazon

See all ukulelesGear for you

As an Amazon Associate GuitarMath earns from qualifying purchases. How we choose gear.

Common questions

What notes are in baritone ukulele tuning?
D3 (146.83 Hz), G3 (196.00 Hz), B3 (246.94 Hz), E4 (329.63 Hz), from the lowest string to the highest.

Last updated November 15, 2026.