Pedalboards and power

Quick answer

Pick a board a little bigger than the pedals you own today, an isolated power supply with spare outputs and enough current for digital pedals, and short patch cables. That combination stops most hum and turns setup into plugging in one cable and one power cord.

A pedalboard keeps your pedals in place, powered and wired so you can set up in a minute. The power supply matters more than the board: a good isolated supply removes most of the hum and noise people blame on pedals.

Tier

10 of 10 picks

Pedalboards 4

Rigid boards with room for power underneath.

  • Budget

    Pedaltrain

    Pedaltrain Nano with Soft Case (PT-NANO-SC)

    Pedalboard

    Best for A small board for a few pedals

    Pedaltrain's smallest board, a light aluminum frame with a soft case. Room for a tuner and a few compact pedals.

    Dimensions
    14 x 5.5 x 1.4 in (35.5 x 14 x 3.5 cm)
    Weight
    0.7 lbs (0.3 kg)
    Case
    Deluxe MX soft case with shoulder strap and accessory pocket
    View on Amazon
  • Mid-range

    Pedaltrain

    Pedaltrain Metro 16 with Soft Case (PT-M16-SC)

    Pedalboard

    Best for A slim board for a compact rig

    A narrow, low-profile three-rail board that fits a handful of pedals plus a tuner, or a compact multi-effects unit.

    Dimensions
    16 x 8 x 1.4 in (40.6 x 20.3 x 3.5 cm)
    Weight
    1.3 lbs (0.58 kg)
    Design
    Three-rail, low profile
    View on Amazon
  • Our pickMid-range

    Pedaltrain

    Pedaltrain Classic JR with Soft Case (PT-CLJ-SC)

    Pedalboard

    Best for Room for a full mid-size board

    A four-rail angled board with an open front for mounting a power supply underneath, plus a deeper soft case for tall pedals.

    Dimensions
    18 x 12.5 x 3.5 in (45.7 x 31.7 x 8.9 cm)
    Weight
    2.6 lbs (1.18 kg)
    Design
    Four-rail, open front for power supply mounting
    View on Amazon
  • Budget

    RockBoard

    RockBoard DUO 2.1 Pedalboard with Gig Bag

    Pedalboard

    Best for An affordable aluminum board with a bag

    A light, angled aluminum board that fits roughly four to seven pedals and comes with a gig bag.

    Capacity
    About 4 to 7 pedals
    Dimensions
    470 x 142 mm (18.5 x 5.6 in); height 35 to 58 mm
    Weight
    0.7 kg (1.6 lbs); gig bag about 0.5 kg
    View on Amazon
Compare pedalboards
NameTypeTierBest forKey specs
Pedaltrain Nano with Soft Case (PT-NANO-SC)PedalboardBudgetA small board for a few pedalsDimensions: 14 x 5.5 x 1.4 in (35.5 x 14 x 3.5 cm); Weight: 0.7 lbs (0.3 kg); Case: Deluxe MX soft case with shoulder strap and accessory pocket
Pedaltrain Metro 16 with Soft Case (PT-M16-SC)PedalboardMid-rangeA slim board for a compact rigDimensions: 16 x 8 x 1.4 in (40.6 x 20.3 x 3.5 cm); Weight: 1.3 lbs (0.58 kg); Design: Three-rail, low profile
Pedaltrain Classic JR with Soft Case (PT-CLJ-SC) Our pickPedalboardMid-rangeRoom for a full mid-size boardDimensions: 18 x 12.5 x 3.5 in (45.7 x 31.7 x 8.9 cm); Weight: 2.6 lbs (1.18 kg); Design: Four-rail, open front for power supply mounting
RockBoard DUO 2.1 Pedalboard with Gig BagPedalboardBudgetAn affordable aluminum board with a bagCapacity: About 4 to 7 pedals; Dimensions: 470 x 142 mm (18.5 x 5.6 in); height 35 to 58 mm; Weight: 0.7 kg (1.6 lbs); gig bag about 0.5 kg

Pedal power supplies 4

Isolated outputs stop the hum that daisy chains cause.

  • Our pickMid-range

    Truetone

    Truetone 1 SPOT Pro CS7

    Isolated power supply

    Best for Powering a mixed board with digital pedals

    Isolated outputs including high-current ones, with switchable voltages on some outputs.

    Outputs
    7 isolated: 1 x 18V 100 mA, 4 x 9/12V switchable 200 mA, 2 x 9V 500 mA
    Total
    1900 mA (per Truetone comparison page)
    Input
    100 to 240V AC worldwide
    View on Amazon
  • Mid-range

    Voodoo Lab

    Voodoo Lab Pedal Power 2 Plus

    Isolated power supply

    Best for A proven isolated supply for analog boards

    A long-running workhorse with isolated outputs and a reputation for quiet, reliable power.

    Outputs
    8 isolated: 4 x 9/12V 100 mA, 2 x 9V 250 mA, 2 x 9V 100 mA with Sag (4V to 9V)
    Connectors
    5.5 x 2.1 mm, center negative, short circuit protected
    Transformer
    Ultra-low noise toroidal (linear supply)
    View on Amazon
  • Premium

    Strymon

    Strymon Zuma

    Isolated power supply

    Best for High-current pedals and big boards

    Every output is isolated and can supply plenty of current, so it handles several digital pedals.

    Outputs
    9 isolated high-current outputs, 500 mA each at 9V
    Variable outputs
    2 outputs selectable 9V, 12V (375 mA) or 18V (250 mA)
    Max power
    48 W
    View on Amazon
  • Budget

    Truetone

    Truetone 1 SPOT Power Supply with Daisy Chain

    Pedal power adapter

    Best for A few analog pedals on a budget

    One adapter and a daisy chain cable to power several pedals. Fine for simple analog setups.

    Output
    9V DC, 1700 mA, single output
    Connector
    2.1 mm center-negative barrel
    Input
    100 to 240V AC worldwide
    View on Amazon
Compare pedal power supplies
NameTypeTierBest forKey specs
Truetone 1 SPOT Pro CS7 Our pickIsolated power supplyMid-rangePowering a mixed board with digital pedalsOutputs: 7 isolated: 1 x 18V 100 mA, 4 x 9/12V switchable 200 mA, 2 x 9V 500 mA; Total: 1900 mA (per Truetone comparison page); Input: 100 to 240V AC worldwide
Voodoo Lab Pedal Power 2 PlusIsolated power supplyMid-rangeA proven isolated supply for analog boardsOutputs: 8 isolated: 4 x 9/12V 100 mA, 2 x 9V 250 mA, 2 x 9V 100 mA with Sag (4V to 9V); Connectors: 5.5 x 2.1 mm, center negative, short circuit protected; Transformer: Ultra-low noise toroidal (linear supply)
Strymon ZumaIsolated power supplyPremiumHigh-current pedals and big boardsOutputs: 9 isolated high-current outputs, 500 mA each at 9V; Variable outputs: 2 outputs selectable 9V, 12V (375 mA) or 18V (250 mA); Max power: 48 W
Truetone 1 SPOT Power Supply with Daisy ChainPedal power adapterBudgetA few analog pedals on a budgetOutput: 9V DC, 1700 mA, single output; Connector: 2.1 mm center-negative barrel; Input: 100 to 240V AC worldwide

Patch cables 2

Short cables to link pedals together.

  • Budget

    MXR

    MXR 6 in Patch Cable 3-Pack (3PDCP06)

    Patch cables

    Best for Linking pedals on any board

    Short, sturdy patch cables with low-profile plugs to save space between pedals.

    Length
    6 in (15 cm)
    Pack
    3 cables
    Conductor
    Oxygen-free copper with spiral shield
    View on Amazon
  • Budget

    Ernie Ball

    Ernie Ball Flat Ribbon Patch Cable 3-Pack, 6 in, Black (P06221)

    Patch cables

    Best for Tight spacing between pedals

    Flat ribbon cables with pancake plugs let you butt pedals close together.

    Length
    6 in
    Pack
    3 cables
    Plugs
    Right-angle 1/4 in TS to right-angle 1/4 in TS, low profile
    View on Amazon
Compare patch cables
NameTypeTierBest forKey specs
MXR 6 in Patch Cable 3-Pack (3PDCP06)Patch cablesBudgetLinking pedals on any boardLength: 6 in (15 cm); Pack: 3 cables; Conductor: Oxygen-free copper with spiral shield
Ernie Ball Flat Ribbon Patch Cable 3-Pack, 6 in, Black (P06221)Patch cablesBudgetTight spacing between pedalsLength: 6 in; Pack: 3 cables; Plugs: Right-angle 1/4 in TS to right-angle 1/4 in TS, low profile

Planning a board?

Buying guide

Isolated vs daisy chain power

A daisy chain runs every pedal from one adapter. It is cheap and works for a few analog pedals, but digital pedals sharing the same ground can add hiss and whine. An isolated supply gives each output its own transformer winding, so pedals cannot pass noise to each other.

Check the voltage, polarity and current draw for every pedal against the outputs on the supply. Most pedals want 9V center negative, but some need more current or a different voltage.

Sizing a board

Lay your pedals out on the floor with patch cables and measure. Leave room for one or two more. Many boards mount the power supply underneath, so check the clearance height against your supply.

Complete your rig

0 of 6 ticked. Tick what you already own.

  1. Guitar
  2. Amp
  3. Tuner
  4. Picks
  5. Strap
  6. Cable

As an Amazon Associate GuitarMath earns from qualifying purchases. How we choose gear.

Common questions

Do I need a pedalboard for two or three pedals?
Not really, but even a small board stops pedals sliding around and lets you keep them wired and powered between sessions.
Why do my pedals hum when I plug them all in?
The usual cause is a shared daisy chain power supply, especially with digital pedals on it. An isolated supply fixes most of it. Keep power cables away from audio cables where you can, and cross them at right angles.
Are flat patch cables worse than round ones?
No. Flat ribbon patch cables save space and are fine for short runs between pedals. Build quality of the plugs matters more than the shape of the cable.

Last updated November 15, 2026.